WMC does not find InfiniTV 4 tuners

[patken44]

I had to reset Windows Media Center, and now it will not recognize my InfiniTV 4. When I run the Ceton diagnostic tool, it can find the tuners and everything looks correct. When I set up the TV signal in WMC, it will find a Hauppauge tuner I also have installed, just not the InfiniTV. I tried re-running the Digital Cable Advisor, to no avail. Any ideas what I can do to get the InfiniTV recognized?

[choliscott]

Have you tried resetting the Infinitv tuner?

1) Close Media Center
2) Bring up Ceton Diagnostics Tool
3) Go to the "Devices" tab
4) Press "Reset Network Settings" Wait until it comes back saying it's complete
5) Press "Clear Tuner Config". Wait until it says it's complete
6) Press "Discover Tuners". Wait until it says it's complete
7) Open WMC & try setting up TV signal again

[patken44]

When I try "Reset Network Settings" I get a message stating "Failed to reset network settings. Please try again or contact Ceton support if unable to proceed." I went ahead and tried the clear tuner config/discover tuners route, but still no luck in Media Center.

[choliscott]

One thing to try is to uninstall/reinstall the drivers or uninstall, reboot & then reinstall the drivers & see what happens

[patken44]

That fixed it. Thanks!