I have 1 system running an PCIe InfiniTV 4 and another that has the Ethernet 6......but the system with the InfiniTV 4 also can access the 6.
But, lately, the InfiniTV 4 system is always using the tuners from the Ethernet and not it's own tuner though ALL the channels are set to use the 4 first. Nothing I do forces that system to use it's own tuner. The cable card is paired and the TA works fine and Cox sees no problems on their end.
Other then to run setup again and to choose only the InfiniTV 4, what can I do?
Using both the PCIe and Ethernet tuners together
Forum rules
Ceton no longer participate in this forum. Official support may still be handled via the Ceton Ticket system.
Ceton no longer participate in this forum. Official support may still be handled via the Ceton Ticket system.
- Beerman
- Posts: 156
- Joined: Mon Sep 19, 2011 7:09 pm
- Location:
- HTPC Specs:
-
- Posts: 512
- Joined: Mon Jul 22, 2013 5:38 am
- Location:
- HTPC Specs:
Mine does that too. It's annoying but I don't use my ETH with any other devices so I guess it doesn't matter in my case.
- holidayboy
- Posts: 2840
- Joined: Sun Jun 05, 2011 1:44 pm
- Location: Northants, UK
- HTPC Specs:
I'm pretty sure that tuner priority goes top to bottom for Live TV but recordings will use the tuners in the reverse order - bottom to top!
Worth swapping the priorities on a few channels for a test at least?...
Worth swapping the priorities on a few channels for a test at least?...
Rob.
TGB.tv - the one stop shop for the more discerning Media Center user.
TGB.tv - the one stop shop for the more discerning Media Center user.
-
- Posts: 46
- Joined: Thu May 23, 2013 3:51 pm
- Location:
- HTPC Specs:
Did you do the order swap yet to see if this solves the issue?