Settings plugin won't load after installing latest beta
Forum rules
Ceton no longer participate in this forum. Official support may still be handled via the Ceton Ticket system.
Ceton no longer participate in this forum. Official support may still be handled via the Ceton Ticket system.
-
- Posts: 182
- Joined: Sat Oct 27, 2012 9:59 pm
- Location: Guthrie, Oklahoma
- HTPC Specs:
Settings plugin won't load after installing latest beta
I updated all three Echos tonight. Video looks awesome. Two the three Echos load the settings plugin fine. The third one shows the correct version number when it boots up, but it won't load the Echo settings plugin and I'm prompted to disable it. Also, it won't load the device webpage like the other two. If hit port 8000 on the IP of the Echo in question, it loads the "star" background with a different looking setting page I've never seen. Any idea?
- Motz
- Posts: 2038
- Joined: Sat Jan 14, 2012 10:28 pm
- Location: Seattle, WA
- HTPC Specs:
So in the latest firmware ip:8000 no longer exists this was for debug only. All settings are slowly shifting towards the web page. You can just enter the IP of the echo to pull up the main settings page.
For the 3rd echo not pulling up the settings I am not positive does it happen all the time? I had it once pop up tell me to disable, i said cancel and went back into it and it never happened again. I think it timed out or something the first time I sent in.
For the 3rd echo not pulling up the settings I am not positive does it happen all the time? I had it once pop up tell me to disable, i said cancel and went back into it and it never happened again. I think it timed out or something the first time I sent in.
-
- Posts: 182
- Joined: Sat Oct 27, 2012 9:59 pm
- Location: Guthrie, Oklahoma
- HTPC Specs:
James, I tried many times to load the settings plugin, including uninstalling and and re-installing the plugin on the main PC. When the Echo boots, it shows the latest firmware version at the bottom of the "Connecting..." screen. Trying to navigate to the IP of the device without a port number fails and port 8000 is the only port that will display anything. I can take a screen shot tonight if you want to see. It has a menu on the left and "Extender | Send diagnostics" is the only menu item with an option, all the others are blank. I'm kinda stuck here because if I can't load the settings plugin there is no way to update it that I know of.
- Motz
- Posts: 2038
- Joined: Sat Jan 14, 2012 10:28 pm
- Location: Seattle, WA
- HTPC Specs:
Hmmm yeah it should look like this:
When I go to :8000 i don't even get a page to come up.You do not have the required permissions to view the files attached to this post.
-
- Posts: 182
- Joined: Sat Oct 27, 2012 9:59 pm
- Location: Guthrie, Oklahoma
- HTPC Specs:
That's my point exactly. Here are some screen shots.Motz wrote:When I go to :8000 i don't even get a page to come up.
This is a shot of the TV with the Echo connected. Notice the IP and the version number, it's the latest, correct?
Now, here's a screen shot of the browser when I navigate to http://192.168.1.135:8000
And finally, here's a screen shot when I navigate directly to http://192.168.1.135
Now, if the Echo is on the latest firmware as it shows on the TV when the Echo boots, why can't I load the settings plugin and why are the settings web pages incorrect?
Thanks
- ucfknight
- Posts: 75
- Joined: Wed Aug 29, 2012 2:25 pm
- Location:
- HTPC Specs:
I've posted in the other thread about not having the video settings I should with the latest beta. I can actually get to IP:8000 as well and see the various screens there. I do not have the video option for Native that is supposed to be in the latest beta.
When going to just the IP it loads (unlike the OP of this thread), but there are no links for diagnostics, settings, or update on that page.
It is almost like the Echo thinks it is on the latest firmware but there are some remnants from a past firmware. If it make a difference, I had to previously go through the the recovery firmware process with Ceton because my unit would not update past the November 16 beta firmware. I had to go through the process of running the recovery.exe on my computer, sending my MAC, pressing certain key strokes on the remote control, and getting a recovery firmware pushed to my Echo. Since then the Echo has updated firmware a couple of time and says it is updating successfully. Obviously something is not right, though.
When going to just the IP it loads (unlike the OP of this thread), but there are no links for diagnostics, settings, or update on that page.
It is almost like the Echo thinks it is on the latest firmware but there are some remnants from a past firmware. If it make a difference, I had to previously go through the the recovery firmware process with Ceton because my unit would not update past the November 16 beta firmware. I had to go through the process of running the recovery.exe on my computer, sending my MAC, pressing certain key strokes on the remote control, and getting a recovery firmware pushed to my Echo. Since then the Echo has updated firmware a couple of time and says it is updating successfully. Obviously something is not right, though.
-
- Posts: 182
- Joined: Sat Oct 27, 2012 9:59 pm
- Location: Guthrie, Oklahoma
- HTPC Specs:
Thank you Motz for your first class customer support. My Echo is back up and running like a charm! Very much appreciated.
-
- Posts: 11
- Joined: Thu Nov 29, 2012 8:47 pm
- Location:
- HTPC Specs:
Think i see this on one of mine also
Did u guys get a echo setting navigation problem too? Media Center asking to close "settings"
Did u guys get a echo setting navigation problem too? Media Center asking to close "settings"
-
- Posts: 1
- Joined: Wed Dec 19, 2012 11:55 pm
- Location:
- HTPC Specs:
Same issue. Sending a PM to address. Thanks.
-
- Posts: 21
- Joined: Thu Oct 11, 2012 3:08 pm
- Location:
- HTPC Specs:
same problem here on a new echo I just received. opened a support ticket.
- Motz
- Posts: 2038
- Joined: Sat Jan 14, 2012 10:28 pm
- Location: Seattle, WA
- HTPC Specs:
Hey guys, so I know you both PMed me and I was out of the office last night and in late this morning. First try to do this:
1.) Uninstall plugin
2.) Remove the Echo from my list of extenders on the WMC box.
3.) Install plugin.
4.) Pair echo with WMC
This seems to be working for some. Also in the latest version you can change most of the settings directly from the webpage of the echo.
1.) Uninstall plugin
2.) Remove the Echo from my list of extenders on the WMC box.
3.) Install plugin.
4.) Pair echo with WMC
This seems to be working for some. Also in the latest version you can change most of the settings directly from the webpage of the echo.