All
Is it possible to get WMC 7 to recognize my HD-PVR (1212) for SAT/Component HD and my 2255 dual tuner for OTA/HD on the same host?
Is there an installation order for the drivers I should be aware of?
WMC 7 + HD-PVR + 2255 ???
-
- Posts: 6
- Joined: Sun Oct 04, 2015 11:52 pm
- Location:
- HTPC Specs:
-
- Posts: 12
- Joined: Sat May 23, 2015 2:49 pm
- Location:
- HTPC Specs:
Hey, this will work no problem. I had a HD-PVR, Colossus, and 2250 all running.
The key is to make sure you are using MCE drivers for both AND making sure the IR blasters are set up properly. The right drivers can be found on the Hauppauge website (there is a tab that says something like Windows MCE).
After you have done this, Windows Media Center will recognize the HD-PVR and the 2255 and change channels correctly.
If you have any questions, feel free to ask.
The key is to make sure you are using MCE drivers for both AND making sure the IR blasters are set up properly. The right drivers can be found on the Hauppauge website (there is a tab that says something like Windows MCE).
After you have done this, Windows Media Center will recognize the HD-PVR and the 2255 and change channels correctly.
If you have any questions, feel free to ask.