I purchased a second PCIe 6 recently and am having a strange issue getting it up and running.
Picked up a second CableCARD from TWC and got it activated. All looks good in the Conditional Access screen - in the Ceton diagnostic tool I test channels and get all green check marks - cleared and rediscovered tuners - re-ran the WMC TV wizard - test a channel and get weak signal / no signal error.
I look in the tuner Web page and signal / SNR is great! Tuner is locked and successful.
What am I doing wrong?
Everything looks good - but no video
Forum rules
Ceton no longer participate in this forum. Official support may still be handled via the Ceton Ticket system.
Ceton no longer participate in this forum. Official support may still be handled via the Ceton Ticket system.
-
kd6icz
- Posts: 512
- Joined: Mon Jul 22, 2013 5:38 am
- Location:
-
HTPC Specs:
-
Crash2009
- Posts: 4357
- Joined: Thu May 17, 2012 12:38 am
- Location: Ann Arbor, Michigan
-
HTPC Specs:
I think there are 2 kinds of signals. 1 is your coax signal that you have checked all ready. 2 is the network signal. Did you assign different IP's to the 2 tuners?
-
kd6icz
- Posts: 512
- Joined: Mon Jul 22, 2013 5:38 am
- Location:
-
HTPC Specs:
Well I'm only testing the new one in my existing working system to make sure it works by itself.
It's working now. I put my old tuning adapter with the new CableCARD / tuner card and it fired right up. So I'll exchange the other TA tomorrow. The biggest challenge is getting a good CableCARD and it appears this is a good one.
It's working now. I put my old tuning adapter with the new CableCARD / tuner card and it fired right up. So I'll exchange the other TA tomorrow. The biggest challenge is getting a good CableCARD and it appears this is a good one.