Hi
I am stuck can anyone help?
What is this Philips 3 pin header for?
I presumed you can disable the iMON IR by moving the switch from SoundGraph to Philips.
But not sure what the Philips header is meant to be for?
I am looking to disable the iMON IR and use a standard RC6 internal IR receiver somehow.
I could use a regular internal USB or CIR type IR receiver board, but not sure if I have anywhere inside on the front of the OrigenAE M10 HTPC case to mount one internally.
Thanks
What is the Philips header for on a Soundgraph VFD/IR board?
- cw-kid
- Posts: 707
- Joined: Mon Jun 20, 2011 5:53 pm
- Location: United Kingdom
- HTPC Specs:
- holidayboy
- Posts: 2840
- Joined: Sun Jun 05, 2011 1:44 pm
- Location: Northants, UK
- HTPC Specs:
I'm pretty sure a friend of mine has that VFD.
He connected a different IR receiver to it somehow. It's a native RC6 one I think.
I'll see if I can get hold of him.
I think he bought a board direct from Originae - it wasn't a straight forward job from what I remember (a few years ago).
He connected a different IR receiver to it somehow. It's a native RC6 one I think.
I'll see if I can get hold of him.
I think he bought a board direct from Originae - it wasn't a straight forward job from what I remember (a few years ago).
Rob.
TGB.tv - the one stop shop for the more discerning Media Center user.
TGB.tv - the one stop shop for the more discerning Media Center user.
- cw-kid
- Posts: 707
- Joined: Mon Jun 20, 2011 5:53 pm
- Location: United Kingdom
- HTPC Specs:
Maybe its for connection to one of these IR310 IR boards ?
http://www.origenae.co.kr/en/accessory_ir310.htm
Although the wiring diagram doesn't look like so
http://www.origenae.co.kr/downloads/wir ... iagram.pdf
http://www.origenae.co.kr/en/accessory_ir310.htm
Although the wiring diagram doesn't look like so
http://www.origenae.co.kr/downloads/wir ... iagram.pdf
- cw-kid
- Posts: 707
- Joined: Mon Jun 20, 2011 5:53 pm
- Location: United Kingdom
- HTPC Specs:
Hi
I just had a look, there is not a lot of room inside this Origenae M10 case.
You can see the iMON IR connected to the VF310 board. And also in the picture is a VideoMate USB Internal IR receiver which is a spare one I have laying around. Might be possible to put it in but I think I would need to re-solder the IR eye on to some longer metal pins and bend them in to position behind the plastic window.
Also I may lose the power on from Shutdown S5 with the USB VideoMate, unless one of the USB ports on the Intel DH67CF ITX board still has power when its shutdown ?
I never managed to get power on from Shutdown working before with this VideoMate internal IR when I was using it previously which is why I took it out of another HTPC and replaced it with an Inteset CIR board.
Thanks
I just had a look, there is not a lot of room inside this Origenae M10 case.
You can see the iMON IR connected to the VF310 board. And also in the picture is a VideoMate USB Internal IR receiver which is a spare one I have laying around. Might be possible to put it in but I think I would need to re-solder the IR eye on to some longer metal pins and bend them in to position behind the plastic window.
Also I may lose the power on from Shutdown S5 with the USB VideoMate, unless one of the USB ports on the Intel DH67CF ITX board still has power when its shutdown ?
I never managed to get power on from Shutdown working before with this VideoMate internal IR when I was using it previously which is why I took it out of another HTPC and replaced it with an Inteset CIR board.
Thanks
- cw-kid
- Posts: 707
- Joined: Mon Jun 20, 2011 5:53 pm
- Location: United Kingdom
- HTPC Specs: