ctn91xx_mpeg0_0 file busy | infinitv 6 PCIe
Posted: Thu May 21, 2015 2:43 am
Edited: Included pastebucket Link
First install of the Infinitv6 PCIe.
My Setup:
- InfiniTV PCIe 6 (192.168.200.2), with Beta FW 15.1.13.152
- Ubuntu 14.x
- Comcast Provider
This is my first install of the PCIe6. I also have a ETH6 that I purchased and got
working under Windows 7.
If I go into Tuner Two -> Tuner, and select a Frequency I am able to select a program and set a channel (Status shows STOPPED however).
The information shows up in the Status page. If I try to cat the ctn91xx_mpeg0_x interface at this point I do not get any output.
When I go back into Tuner tab and start the Streaming RTP protocol STOPPED changes to PLAYING. At this point when
I try to cat the ctn91xx_mpeg0_x interface it says the file is busy (I assume it is the process on the card sending the stream).
I do not get anything when trying to view the stream after starting RTP. I've tried : ffprobe -i rtp://192.168.200.2:8000.
tcpdump -i ctn dst 192.168.200.2 also shows nothing.
Copy protection shows Copy Free (00).
1) In the instructions when it says to use mplayer .. for those people who have it working does it show Playback as STOPPED or PLAYING at that point?
2) Has anyone been able to get RTP streaming to work? I've read a thread and it seems others have had problems as well.
Link to Log: http://www.pastebucket.com/86224
I am close but still not getting anything.. Help! Thanks.
First install of the Infinitv6 PCIe.
My Setup:
- InfiniTV PCIe 6 (192.168.200.2), with Beta FW 15.1.13.152
- Ubuntu 14.x
- Comcast Provider
This is my first install of the PCIe6. I also have a ETH6 that I purchased and got
working under Windows 7.
If I go into Tuner Two -> Tuner, and select a Frequency I am able to select a program and set a channel (Status shows STOPPED however).
The information shows up in the Status page. If I try to cat the ctn91xx_mpeg0_x interface at this point I do not get any output.
When I go back into Tuner tab and start the Streaming RTP protocol STOPPED changes to PLAYING. At this point when
I try to cat the ctn91xx_mpeg0_x interface it says the file is busy (I assume it is the process on the card sending the stream).
I do not get anything when trying to view the stream after starting RTP. I've tried : ffprobe -i rtp://192.168.200.2:8000.
tcpdump -i ctn dst 192.168.200.2 also shows nothing.
Copy protection shows Copy Free (00).
1) In the instructions when it says to use mplayer .. for those people who have it working does it show Playback as STOPPED or PLAYING at that point?
2) Has anyone been able to get RTP streaming to work? I've read a thread and it seems others have had problems as well.
Link to Log: http://www.pastebucket.com/86224
I am close but still not getting anything.. Help! Thanks.