Activation Failure of WMC's digital product key for Cablecard
-
- Posts: 598
- Joined: Mon Dec 19, 2011 8:56 am
- Location:
- HTPC Specs:
Both Windows 7 and Windows 8 both have a WMC activation screen, especially when using a cable card tuner.
[/quote]
Nope. I've used cable with WMC since Windows XP. I have used Ceton tuners since digital cable became available. There has never been an activation in WMC for cablecards or anything else.
[/quote]
[/quote]
Nope. I've used cable with WMC since Windows XP. I have used Ceton tuners since digital cable became available. There has never been an activation in WMC for cablecards or anything else.
[/quote]
-
- Posts: 24
- Joined: Sat Dec 08, 2012 4:50 am
- Location:
- HTPC Specs:
Been fighting same thing on physical machine new win 7 build. Found this and it is working but need to go to bed now. Hope it lasts and works for you.
https://forum.silicondust.com/forum/vie ... ion#p53985
https://forum.silicondust.com/forum/vie ... ion#p53985
-
- Posts: 24
- Joined: Tue Apr 18, 2017 5:09 pm
- Location:
- HTPC Specs:
LOL I always forget to run the digital cable advisor and newest PlayReady
Also- You have to go to main wmc menu and extras menu and actually RUN the cable advisor manually.. You did <<< that right?
Also- You have to go to main wmc menu and extras menu and actually RUN the cable advisor manually.. You did <<< that right?
-
- Posts: 158
- Joined: Sun Dec 24, 2017 6:14 pm
- Location:
- HTPC Specs:
Thanks guys, but as mentioned in the OP I had no problems with a physical host.
This thread was about a virtual machine which is (was) behaving differently than physical.
This thread was about a virtual machine which is (was) behaving differently than physical.
- Jacoats
- Posts: 100
- Joined: Thu Mar 16, 2017 7:57 pm
- Location:
- HTPC Specs:
did you get this activation issue resolved ? Im having that same problem
-
- Posts: 30
- Joined: Tue Oct 24, 2017 1:14 am
- Location:
- HTPC Specs:
-
- Posts: 30
- Joined: Tue Oct 24, 2017 1:14 am
- Location:
- HTPC Specs:
I have the same issue. Activation required and unable to use internet according to the activation. But I do have internet.
-
- Posts: 158
- Joined: Sun Dec 24, 2017 6:14 pm
- Location:
- HTPC Specs:
Hey guys, try this. It requires an active internet connection.RonZimmerman wrote: ↑Wed May 03, 2023 1:15 pm I have the same issue. Activation required and unable to use internet according to the activation. But I do have internet.
Open a command prompt.
Run this command:
Code: Select all
%systemroot%\system32\slmgr.vbs -dlv
This will show you the current license status.
Copy down the really long "product activation ID".
Then, depending on which Windows version you're running, you'll type these two commands to activate WMC.
The product keys below are universal. They are not unique. We all use the same WMC product key.
WINDOWS 7 ULTIMATE ---->
Code: Select all
%windir%\system32\slmgr -ipk MVV4F-R2T29-WBHYJ-BBFQY-J64XX
%windir%\system32\slmgr.vbs /ato slmgr.vbs /ato [whatever the product activation ID is]
WINDOWS 7 PROFESSIONAL ---->
Code: Select all
%windir%\system32\slmgr -ipk 263DJ-2Y9YT-6X9G6-W28DB-697TF
%windir%\system32\slmgr.vbs /ato [whatever the product activation ID is]
Now, reboot and run this command again to make sure you're activated.
Code: Select all
%systemroot%\system32\slmgr.vbs -dlv
Last edited by CZ Eddie on Sat May 06, 2023 6:12 pm, edited 1 time in total.
-
- Posts: 158
- Joined: Sun Dec 24, 2017 6:14 pm
- Location:
- HTPC Specs:
Not sure why, but I don't get email notifications of replies to this topic (or anything else on this board) even though I'm subscribed.
They don't even show up in my spam bin.
They don't even show up in my spam bin.
-
- Posts: 9
- Joined: Fri Jul 28, 2023 6:35 pm
- Location:
- HTPC Specs:
I've experienced the same issue - fresh 1511 and Ryan's latest package. 4 tuner Ceton. Previously working with an 8.1 install and then the hard drive crapped out. New used nice computer.
I sniffed during this call and see -
e13678.dscb.akamaiedge.net
I wonder if I could spoof this on my local machine and satisfy. Or would it be best to just debug this code and try various branches?
Other than this everything else has worked great.
I should mention that if I enter a key of all 0's it doesn't complain about that but rather internet connection - which is fine.
I didn't notice CZ Eddie's vbs post - so I'll give that a shot.
I sniffed during this call and see -
e13678.dscb.akamaiedge.net
I wonder if I could spoof this on my local machine and satisfy. Or would it be best to just debug this code and try various branches?
Other than this everything else has worked great.
I should mention that if I enter a key of all 0's it doesn't complain about that but rather internet connection - which is fine.
I didn't notice CZ Eddie's vbs post - so I'll give that a shot.
-
- Posts: 9
- Joined: Fri Jul 28, 2023 6:35 pm
- Location:
- HTPC Specs:
Definitely get farther. The -dlv command gives two sections - a windows and an ocur. I did for the ocur activation ID.
Now playing a channel complains about playready and prompts to update -
Update PlayReady
The PlayReady update was incomplete. You will not be able to watch or record protected content until the update is successful.
There's an Update button which upon pressing complains about no internet connection.
I've tried 2 different PlayReady packages - the x64 one from Gary's repo (PlayReadyPC_x64_v1.3.10.msi) and this one that I had laying around -
PlayReady-v1.3.2313.10-amd64.msi
Now playing a channel complains about playready and prompts to update -
Update PlayReady
The PlayReady update was incomplete. You will not be able to watch or record protected content until the update is successful.
There's an Update button which upon pressing complains about no internet connection.
I've tried 2 different PlayReady packages - the x64 one from Gary's repo (PlayReadyPC_x64_v1.3.10.msi) and this one that I had laying around -
PlayReady-v1.3.2313.10-amd64.msi
- garyan2
- Posts: 7479
- Joined: Fri Nov 27, 2015 7:23 pm
- Location:
- HTPC Specs:
- Gary
Keeping WMC alive beyond January 2020. https://garyan2.github.io
Keeping WMC alive beyond January 2020. https://garyan2.github.io
-
- Posts: 9
- Joined: Fri Jul 28, 2023 6:35 pm
- Location:
- HTPC Specs:
Followed that but the last step - I don't see an Install PlayReady option. Definitely ran ResetDRM from an admin command shell, rebooted, installed the PC_x64 msi.
-
- Posts: 9
- Joined: Fri Jul 28, 2023 6:35 pm
- Location:
- HTPC Specs:
I'm a slow reader. Will try the 1.3.0 procedure.
-
- Posts: 9
- Joined: Fri Jul 28, 2023 6:35 pm
- Location:
- HTPC Specs:
Still not getting the Install PlayReady option in the list settings/General/Windows Media Center Setup.
There is an Update PlayReady option in settings/tv/tv signal. which gives the internet error.
The PlayReady runtime version in programs and files is 1.3.0
There is an Update PlayReady option in settings/tv/tv signal. which gives the internet error.
The PlayReady runtime version in programs and files is 1.3.0
-
- Posts: 9
- Joined: Fri Jul 28, 2023 6:35 pm
- Location:
- HTPC Specs:
I can add one detail I forgot to mention - at settings/General/Windows Media Center Setup/Set Up Internet Connection - when I set it to always on Yes - I don't have a test button. Just a Next button and it does not lock up.
- garyan2
- Posts: 7479
- Joined: Fri Nov 27, 2015 7:23 pm
- Location:
- HTPC Specs:
Right. I removed the Test button because it would guarantee WMC to lock up there.
- Gary
Keeping WMC alive beyond January 2020. https://garyan2.github.io
Keeping WMC alive beyond January 2020. https://garyan2.github.io
-
- Posts: 9
- Joined: Fri Jul 28, 2023 6:35 pm
- Location:
- HTPC Specs:
Would it be possible if the test button were present the Install PlayReady option might return?
- garyan2
- Posts: 7479
- Joined: Fri Nov 27, 2015 7:23 pm
- Location:
- HTPC Specs:
No. The test button is actually still there. Just not visible/clickable. Has nothing to do with PlayReady success.
Sent from my SM-G781U1 using Tapatalk
Sent from my SM-G781U1 using Tapatalk
- Gary
Keeping WMC alive beyond January 2020. https://garyan2.github.io
Keeping WMC alive beyond January 2020. https://garyan2.github.io
-
- Posts: 9
- Joined: Fri Jul 28, 2023 6:35 pm
- Location:
- HTPC Specs:
If I install the playready msi the Install PlayReady option does not appear. If I un-install it - it appears.
When your instructions say manually install playready - could that mean something other than running the msi? MCE must be checking if it's already installed but since it was installed outside of MCE some info must not be initialized properly?
When your instructions say manually install playready - could that mean something other than running the msi? MCE must be checking if it's already installed but since it was installed outside of MCE some info must not be initialized properly?